VMware tools怎么安裝？VMware tools安裝方法分享

2012/11/7 14:14:08  出處：本站整理   人氣：1893次    字號：小  中  大

vmware tools怎么安裝？相信還有不少朋友為在Vmware虛擬機中如何安裝VMware tools感到困惑吧，下面小編就以重慶誠愷科技跟大家分享下VMware tools的安裝方法。

具體安裝步驟如下：

1、啟動并進入Linux系統

2、然后選擇虛擬機菜單中的“虛擬機/安裝VMware-Tools

此時就會有把VMware-tools文件映像到CD－ROM中。

3、把“VMwareTools-6.0.2-59824.i386.rpm，VMwareTools-6.0.2-59824.tar.gz”文件復制到自己的需要的位置中。

選擇一種安裝方式，在此我選VMwareTools-6.0.2-59824.tar.gz。

4、解壓

# tar -zxvf VmwareTools-6.0.2-59824.tar.gz

5、進入/home/tsm/Tools/vmware-tools-distrib目錄中

cd /home/tsm/Tools/vmware-tools-distrib

6、輸入 ./vmware-install.pl進行安裝

在安裝過程中根據提示進行選擇，在此我一路選擇回車即可，周詳安裝過程如下：

[root@tsmpc vmware-tools-distrib]# ./vmware-install.pl，

Creating a new VMware Tools installer database using the tar4 format.

Installing VMware Tools.

In which directory do you want to install the binary files?

[/home/tsm/software]

What is the directory that contains the init directories (rc0.d/ to rc6.d/)?

[/etc/rc.d]

What is the directory that contains the init scripts?

[/etc/rc.d/init.d]

In which directory do you want to install the daemon files?

[/home/tsm/sbin]

The path "/home/tsm/sbin" does not exist currently. This program is going to

create it, including needed parent directories. Is this what you want?

[yes]

In which directory do you want to install the library files?

[/home/tsm/lib/vmware-tools]

The path "/home/tsm/lib/vmware-tools" does not exist currently. This program is

going to create it, including needed parent directories. Is this what you want?

[yes]

In which directory do you want to install the documentation files?

[/home/tsm/doc/vmware-tools]

The path "/home/tsm/doc/vmware-tools" does not exist currently. This program is

going to create it, including needed parent directories. Is this what you want?

[yes]

The installation of VMware Tools 6.0.2 build-59824 for Linux completed

successfully. You can decide to remove this software from your system at any

time by invoking the following command:

"/home/tsm/software/vmware-uninstall-tools.pl".

Before running VMware Tools for the first time, you need to configure it by

invoking the following command: "/home/tsm/software/vmware-config-tools.pl". Do

you want this program to invoke the command for you now? [yes]

Stopping VMware Tools services in the virtual machine:

Guest operating system daemon: [確定]

Trying to find a suitable vmmemctl module for your running kernel.

None of the pre-built vmmemctl modules for VMware Tools is suitable for your

running kernel. Do you want this program to try to build the vmmemctl module

for your system (you need to have a C compiler installed on your system)?

[yes]

Using compiler "/usr/bin/gcc". Use environment variable CC to override.

What is the location of the directory of C header files that match your running

kernel? [/lib/modules/2.6.23.1-42.fc8/build/include]

Extracting the sources of the vmmemctl module.

Building the vmmemctl module.

Using 2.6.x kernel build system.

make: Entering directory `/tmp/vmware-config0/vmmemctl-only’

make -C /lib/modules/2.6.23.1-42.fc8/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules

make[1]: Entering directory `/usr/src/kernels/2.6.23.1-42.fc8-i686’

CC [M] /tmp/vmware-config0/vmmemctl-only/os.o

SHIPPED /tmp/vmware-config0/vmmemctl-only/vmmemctl1.o

LD [M] /tmp/vmware-config0/vmmemctl-only/vmmemctl.o

Building modules, stage 2.

MODPOST 1 modules

CC /tmp/vmware-config0/vmmemctl-only/vmmemctl.mod.o

LD [M] /tmp/vmware-config0/vmmemctl-only/vmmemctl.ko

make[1]: Leaving directory `/usr/src/kernels/2.6.23.1-42.fc8-i686’

cp -f vmmemctl.ko ./../vmmemctl.o

make: Leaving directory `/tmp/vmware-config0/vmmemctl-only’

The module loads perfectly in the running kernel.

Trying to find a suitable vmhgfs module for your running kernel.

None of the pre-built vmhgfs modules for VMware Tools is suitable for your

running kernel. Do you want this program to try to build the vmhgfs module for

your system (you need to have a C compiler installed on your system)? [yes]

Extracting the sources of the vmhgfs module.

Building the vmhgfs module.

Using 2.6.x kernel build system.

make: Entering directory `/tmp/vmware-config0/vmhgfs-only’

make -C /lib/modules/2.6.23.1-42.fc8/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules

make[1]: Entering directory `/usr/src/kernels/2.6.23.1-42.fc8-i686’

CC [M] /tmp/vmware-config0/vmhgfs-only/backdoor.o

CC [M] /tmp/vmware-config0/vmhgfs-only/backdoorGcc32.o

CC [M] /tmp/vmware-config0/vmhgfs-only/bdhandler.o

CC [M] /tmp/vmware-config0/vmhgfs-only/cpName.o

CC [M] /tmp/vmware-config0/vmhgfs-only/cpNameLinux.o

CC [M] /tmp/vmware-config0/vmhgfs-only/cpNameLite.o

CC [M] /tmp/vmware-config0/vmhgfs-only/dbllnklst.o

CC [M] /tmp/vmware-config0/vmhgfs-only/dentry.o

CC [M] /tmp/vmware-config0/vmhgfs-only/dir.o

CC [M] /tmp/vmware-config0/vmhgfs-only/eventManager.o

CC [M] /tmp/vmware-config0/vmhgfs-only/file.o

CC [M] /tmp/vmware-config0/vmhgfs-only/filesystem.o

CC [M] /tmp/vmware-config0/vmhgfs-only/fsutil.o

CC [M] /tmp/vmware-config0/vmhgfs-only/hgfsBd.o

CC [M] /tmp/vmware-config0/vmhgfs-only/hgfsUtil.o

CC [M] /tmp/vmware-config0/vmhgfs-only/inode.o

CC [M] /tmp/vmware-config0/vmhgfs-only/kernelStubsLinux.o

CC [M] /tmp/vmware-config0/vmhgfs-only/link.o

CC [M] /tmp/vmware-config0/vmhgfs-only/message.o

CC [M] /tmp/vmware-config0/vmhgfs-only/module.o

CC [M] /tmp/vmware-config0/vmhgfs-only/page.o

CC [M] /tmp/vmware-config0/vmhgfs-only/request.o

CC [M] /tmp/vmware-config0/vmhgfs-only/rpcin.o

CC [M] /tmp/vmware-config0/vmhgfs-only/rpcout.o

CC [M] /tmp/vmware-config0/vmhgfs-only/staticEscape.o

CC [M] /tmp/vmware-config0/vmhgfs-only/stubs.o

CC [M] /tmp/vmware-config0/vmhgfs-only/super.o

LD [M] /tmp/vmware-config0/vmhgfs-only/vmhgfs.o

Building modules, stage 2.

MODPOST 1 modules

CC /tmp/vmware-config0/vmhgfs-only/vmhgfs.mod.o

LD [M] /tmp/vmware-config0/vmhgfs-only/vmhgfs.ko

make[1]: Leaving directory `/usr/src/kernels/2.6.23.1-42.fc8-i686’

cp -f vmhgfs.ko ./../vmhgfs.o

make: Leaving directory `/tmp/vmware-config0/vmhgfs-only’

The module loads perfectly in the running kernel.

pcnet32 31429 0

Unloading pcnet32 module

Trying to find a suitable vmxnet module for your running kernel.

None of the pre-built vmxnet modules for VMware Tools is suitable for your

running kernel. Do you want this program to try to build the vmxnet module for

your system (you need to have a C compiler installed on your system)? [yes]

Extracting the sources of the vmxnet module.

Building the vmxnet module.

Using 2.6.x kernel build system.

make: Entering directory `/tmp/vmware-config0/vmxnet-only’

make -C /lib/modules/2.6.23.1-42.fc8/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules

make[1]: Entering directory `/usr/src/kernels/2.6.23.1-42.fc8-i686’

CC [M] /tmp/vmware-config0/vmxnet-only/vmxnet.o

Building modules, stage 2.

MODPOST 1 modules

CC /tmp/vmware-config0/vmxnet-only/vmxnet.mod.o

LD [M] /tmp/vmware-config0/vmxnet-only/vmxnet.ko

make[1]: Leaving directory `/usr/src/kernels/2.6.23.1-42.fc8-i686’

cp -f vmxnet.ko ./../vmxnet.o

make: Leaving directory `/tmp/vmware-config0/vmxnet-only’

The module loads perfectly in the running kernel.

Trying to find a suitable vmblock module for your running kernel.

None of the pre-built vmblock modules for VMware Tools is suitable for your

running kernel. Do you want this program to try to build the vmblock module

for your system (you need to have a C compiler installed on your system)?

[yes]

Extracting the sources of the vmblock module.

Building the vmblock module.

Using 2.6.x kernel build system.

make: Entering directory `/tmp/vmware-config0/vmblock-only’

make -C /lib/modules/2.6.23.1-42.fc8/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules

make[1]: Entering directory `/usr/src/kernels/2.6.23.1-42.fc8-i686’

CC [M] /tmp/vmware-config0/vmblock-only/linux/block.o

CC [M] /tmp/vmware-config0/vmblock-only/linux/control.o

CC [M] /tmp/vmware-config0/vmblock-only/linux/dbllnklst.o

CC [M] /tmp/vmware-config0/vmblock-only/linux/dentry.o

CC [M] /tmp/vmware-config0/vmblock-only/linux/file.o

CC [M] /tmp/vmware-config0/vmblock-only/linux/filesystem.o

CC [M] /tmp/vmware-config0/vmblock-only/linux/inode.o

CC [M] /tmp/vmware-config0/vmblock-only/linux/module.o

CC [M] /tmp/vmware-config0/vmblock-only/linux/stubs.o

CC [M] /tmp/vmware-config0/vmblock-only/linux/super.o

LD [M] /tmp/vmware-config0/vmblock-only/vmblock.o

Building modules, stage 2.

MODPOST 1 modules

CC /tmp/vmware-config0/vmblock-only/vmblock.mod.o

LD [M] /tmp/vmware-config0/vmblock-only/vmblock.ko

make[1]: Leaving directory `/usr/src/kernels/2.6.23.1-42.fc8-i686’

cp -f vmblock.ko ./../vmblock.o

make: Leaving directory `/tmp/vmware-config0/vmblock-only’

The module loads perfectly in the running kernel.

[EXPERIMENTAL] The Virtual Machine Communication Interface (VMCI) service

provides a new communication capability with the Host, primarily for

development at the moment. Would you like to enable this feature? [no]

Detected X.org version 1.3.

No drivers for X.org version: 1.3.

Please choose one of the following display sizes that X will start with (1 -

15):

[1] "640x480"

[2]< "800x600"

[3] "1024x768"

[4] "1152x864"

[5] "1280x800"

[6] "1152x900"

[7] "1280x1024"

[8] "1376x1032"

[9] "1400x900"

[10] "1400x1050"

[11] "1440x900"

[12] "1680x1050"

[13] "1600x1200"

[14] "1920x1200"

[15] "2364x1773"

Please enter a number between 1 and 15:

[2] 3

Starting VMware Tools services in the virtual machine:

Switching to guest configuration: [確定]

Guest filesystem driver: [確定]

Mounting HGFS shares: [失敗]

Guest memory manager: [確定]

Guest vmxnet fast network device: [確定]

Blocking file system: [確定]

DMA setup: [確定]

Guest operating system daemon: [確定]

/etc/rc.d/init.d/vmware-tools: line 822: vmware-guestd: command not found

The configuration of VMware Tools 6.0.2 build-59824 for Linux for this running

kernel completed successfully.

You must restart your X session before any mouse or graphics changes take

effect.

You can now run VMware Tools by invoking the following command:

"/home/tsm/software/vmware-toolbox" during an X server session.

To use the vmxnet driver, restart networking using the following commands:

/etc/init.d/network stop

rmmod pcnet32

rmmod vmxnet

modprobe vmxnet

/etc/init.d/network start

To make use of the virtual printer, you will need to restart the CUPS service

Enjoy,

--the VMware team

[root@tsmpc vmware-tools-distrib]#

以上就是VMware tools的安裝方法了，希望能對朋友們做個參考吧！